Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.8811769
- Product Categories
- Friendly Links
- home > Supply > Steel dustproof anti Iron and steel shield shield specifications Daquan stainless steel plate shield
Steel dustproof anti Iron and steel shield shield specifications Daquan stainless steel plate shield
Information Name: | Steel dustproof anti Iron and steel shield shield specifications Daquan stainless steel plate shield |
Published: | 2012-11-22 |
Validity: | 90 |
Specifications: | No |
Quantity: | 1.00 |
Price Description: | |
Detailed Product Description: | Steel shield with good sealing, anti iron filings, anti-coolant, anti occasional incidents of tools. . Durable, smooth running, low noise, beautiful appearance. 2 steel guard rail of machine tool protection suitable for high-speed movement both smooth and without any vibration noise. 3. Steel shield means is not only to protect the life of the guard plate, is more important is to ensure that the machine precision. Steel shield each section of the guard plate and parallel opened, and in parallel retracted run freely. 5 plate shield does not make a shield out of touch, percussion, both beautiful and improve the life of the guard. 6 on the basis of the original sealing strip and stamped with a layer of stainless steel cover to prevent of iron filings high temperature burn strips to rub the the orbit surface strain rail. The steel shield device advantages: 1, guard per piece bursts with action and general shield completely different from the one connected to a pull-type, so the noise is very low. 2, the shield can increase service life of the device. 3, the shield means of the steel sheet the shroud moving speed can rise to 120m/min and withstand higher G value (2G). 4, the shield means of the steel sheet so that shroud acting simultaneously and in parallel (to avoid a the general shear shroud still meandering disadvantage). 5, at high speed can be more stable, no vibration is generated. Telescopic rails of steel, stainless steel machine tool guide shield steel shield is in the form of the traditional protection of machine tools. Steel telescopic rail guard in this area is a wide range of applications, to prevent the entry of swarf and other sharp things to play an effective role in protection, can effectively reduce the cooling through structural measures and appropriate plate scrapings liquid infiltration. I plant steel telescopic rail guard able to adapt to the ever-increasing demands of modern machine tools for high-tech, the correct location of the installation, high operating speed. Technical data steel telescoping rail shield for high-quality 2-3mm thick steel plate cold pressing may also be made according to the requirements for the stainless steel. Special surface polished it another appreciation. For all types of machine tools, we can provide rail protection type (horizontal, vertical, diagonal, horizontal). We developed the shield structure is also different according to the running speed and the different rail. The under running speed 10m/min we fitted poly resin or brass slider. Medium speed 30m/min under equipped with a roller. In addition, the need to use a buffer between the driver board, scraping plates and suck litter board system. The slider buffer system to reduce collisions, noise and friction. Section steel telescopic rail guard its proportion, weight and operating characteristics are important. Every single section should be as long as possible, thus reducing the section number, and reduce costs. In general the maximum tensile and minimum compression ratio should be between 3:1 and 5:1. Suitable for most applications industry standard structure (1) Edit this paragraph structure selection at reasonable prices, width to 900mm width larger must hems improve lateral stability. This roof type (3) and the hemming (4) can be done. In addition, the the tilt type (2) can be brilliantly liquids and debris to flow away. Steel retractable shield section its proportion, weight and operating characteristics are important. Every single section should be as long as possible, so reducing the section number, and lowering costs. The general maximum tensile smallest compression ratio should be between 3:1 and 5:1 (up to 10:1). |
Admin>>>
You are the 35764 visitor
Copyright © GuangDong ICP No. 10089450, Yanshan County Xin Wantong Machinery Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 35764 visitor
Copyright © GuangDong ICP No. 10089450, Yanshan County Xin Wantong Machinery Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility