Machine damping Horn 

 Features 

 The rubber shock absorption to the attenuation of the vibration of the machine itself, rumored to reduce vibration force, to prevent the introduction of vibration force to ensure the processing of dimensional accuracy and quality, to control the structure of the building resonant transmit the vibration force and noise. The crude, and finishing all kinds of machine composed of a production unit, to adapt to the development of logistics technology. 


 Install the machine do not need to set the anchor bolts and fixed ground, good shock absorption and considerable vertical deflection, so that the machine stability on the ground. Save installation costs, and shorten the installation cycle. Can be exchanged at any time according to the production machine position to eliminate the secondary installation costs, installation made possible so that the machine upstairs. 


 You can adjust the level of machine adjustment range, convenient and fast. 


 Nitrile synthetic rubber, resistant to grease and coolant. 

 Scope of application 


 Metal processing machine tools, forming machine tools, textile, printing machinery, food processing machines, rubber machinery, wires, cables, machinery, packaging machinery, generators and heavy equipment. 

 Use 


 The required horn into the machine foot holes, penetration of the bolt, spin and load-bearing plate contact, and then the level of machine adjustment (screw the bolt clockwise, lift the machine) adjusted the level of machine, tighten the nut fixed level of state. 


 Because the rubber may creep in when the Horn is the first time to use, two weeks later adjust the level of machine.